Skip to content

Cables provided with XO-VAC+

XO-VAC+ comes the following with a set of cables:

  • x1 Cat 6 SSTP RJ45 Ethernet Cable (6.5 ft / 2 m)
  • x1 D-Sub 25 Male - Male Cable - Wired straight - 20 AWG (2.5 ft / 0.76 m)
  • x1 D-Sub 25 Female - Female Cable - Wired straight - 26 AWG (2.5 ft / 0.76 m)
  • x2 mains cable with IEC 60320-1 C13 connectors with Fuses and socket plugs matching the country of installation
Danger - Fire & Electric Shock Hazards

Do not use other D-Sub 25 cables than the ones provided. Using different specs of cables can create fire hazards and/or loss of performances.

Danger - Fire & Electric Shock Hazards

Always attach the D-Sub 25 cables with the connector mounting screws. A misinserted cable can create fire hazards and/or damage XO-VAC+.

Danger - Electric Shock Hazard

Do not hot plug (insert or remove) the cables while XO-VAC+ is powered on. There is an electric shock risk for the user and the XO-VAC+ can get damaged.

Warning

The DB25 Male to Male Cable and the DB25 Female to Female Cable can expose you to chemicals including phthalates, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov